Morgana BM 60, Руководство оператора

Страница: 24 / 33

T10170 OPERATOR MANUAL BM 60
23
4.1.5 Corner stapling vertical, option 1
1. Open the top cover.
2.
With the double/single stapling switch select single stapling.
3. Mount the Corner Stapling Guide (optional accessory p/n 600003) on the left side
guide and move it as far left as possible.
4. Set stapler head 1 above the correct anvil (see table in section 4.1.8) Load stapler
magazine, by pressing the stapler magazine release button the magazine will come
out. Make sure the magazine in stapler 2 is empty.
NOTE: Use only Chisel point staples P/N 800001.
5. Insert one set.
6.
Make the final adjustment by loosening and moving the right side guide up against the
set and then back 1 mm.
7. Set desired staple position with the paper stop crank.
8. Close the top cover.
9. Set the stapling switch to
ON position.
10. Set the folding switch to OFF position.
11. Flip down the fold stop to enable the sets to pass through the machine.
12. Take off the Belt Stacker or Delivery Tray. Mount the adapter on the brackets (1) on
Booklet Maker and mount the Belt Stacker/Delivery Tray on the adapter (2).
13. Continue to section 4.2 OPERATION.
NOTE: By using the adapter (optional) either the Belt Stacker or the Delivery Tray can be
used for stacking of stapled sets.
1
2