REMOVING PARTS
NOTE: Repair or service that involves diagnostic removal of
components violates the warranty of this equipment, unless
performed by an authorized representative of Morgan
MEDesign
, Inc. Contact Morgan MEDesign
for details,
concerns or questions.
The removal of parts within the service-able parts of this equipment requires
special consideration. Following are some guidelines.
1.
Attention to cosmetic surfaces is mandatory. Be careful not to scrape or
dent any of the surfaces or finishes that appear through-out the equipment.
The attachment hardware has been selected to have nick and burr free edges
and such edges and surfaces should remain after your service. Use new
tools and handle them with care.
2.
All repair or component removal is to be performed with all power
disconnected.
3.
All electrical repair is to be performed by credentialed persons within the
knowledge of such repair possessing permission to proceed. High voltages
may be present and adherence to the safety warnings is mandatory. Such
repair is at the risk of the instigator and Morgan MEDesign
, Inc. holds it-self
clear and harmless for actions that result during and after such procedures.
4.
All removed attachments must be placed back into their original positions.
Careful mechanical detailing and matching of tolerance parts have resulted in
mandated placements that must remain after the procedure.
5.
All safety labels must remain in place during and after the procedures.
Should the process destroy or deface a label a new one is to be obtained
from Morgan MEDesign
, Inc.
6.
Do not attempt to repair any module within this equipment that has been
manufactured by another company and used as a sub-assembly. This
includes, but is not limited to, modules built by FAIRCHILD, RENTEC,
MAGNETIC, CORCOM or other manufacturer as evidenced by their label or
logo appearing on the sub-assembly. These modules are repaired by
replacing them with another from Morgan MEDesign
, Inc. Do not attempt to
contact these vendors in the service of their modules as in most cases special
versions of their product have been used in the manufacture of your
equipment and are unique to the Morgan MEDesign
application.
Morgan MEDesign
, Inc. - Maintenance ~ Service Manual BASIC-ONE -
2005 Page 4
