background image

9

8

INSTALLATION

OPERATING INSTRUCTIONS

FUNCTION ILLUSTRATION

1.   TO SET THE CLOCK:

•    When the appliance is connected to the power supply, the display will show 12:00.

•    Touch the “SET” button and hold for 3 seconds.

•    The “12” on the hour side will start flashing.  Touch “+” or “–“ button to set hour.

•    Then touch the “SET” button again and “00” on the minute side will start flashing.

•    Touch “+” or “–“ to set the minute.

•    Touch the “SET” button to finalize timer setting.

NOTE: The timer setting will need to be reset again in the event of a power interruption. 

2.   OPERATING THE APPLIANCE:

•    Touch the “ON/OFF” button. The appliance will enter standby mode.

•    The blower has three speeds - “SLOW”, “MEDIUM” and “HIGH”.  These three speeds can be toggled in-between 

     each other.

•    Touch the “+” button to start operating at slow speed.

•    Touch the “-“ button to switch to medium speed.

•    Touch the “SET” button to switch to high speed.

NOTE:

–    You can toggle between the speeds by touching the respective buttons.

–    To switch off the appliance, touch the “ON/OFF” button, the blower will power off immediately.  Touch the “DELAY”

     button, the fan will continue to operate for 5 minutes and the appliance will then switch off.

3.   OPERATING THE LIGHTS:

•    The lights operate separately from the “ON/OFF” button.

•    When the appliance is connected to the power supply, the lights can be switched ON / OFF by touching the “ON/OFF”

     button.

•    When the lights are turned on during the motor operation, touch the “DELAY” button. The fan and lights will 

     continue to operate for 5 minutes before switching off. 

CONTROL PANEL

6.   EXHAUST PIPE CONNECTING TO THE WALL OUTSIDE

•    The other head of exhaust pipe should be connected to the hole of wall outside (Diameter of the hole should 

     be 85mm)

7.   CHECKING AND TESTING

•    After installation, connect appliance to the power supply and turn on the appliance.  Check if all functions of the 

     appliance are working normally, i.e.no vibration and no exhaust resistance.

MDH-923STOC(IM)281216.qxp_Layout 1  12/29/16  5:14 PM  Page 5

Содержание MDH-923STOC







Отзывы: