78
Genuine OEM Parts 1.800.233.4823 www.morganolsonparts.com
79
USPS 2 Ton Delivery Vehicle 2016 - 2018 Models
CONFIDENTIAL
NOT
FOR DISTRIBUTION
CONFIDENTIAL
NOT
FOR DISTRIBUTION
CONFIDENTIAL
NOT
FOR DISTRIBUTION
CONFIDENTIAL
NOT
FOR DISTRIBUTION
Morgan Olson Operator & Service Manual
for Keyless Entry Controller Diagnostics
PN 46029040
NST12302-3_A.ai 2015-10-07
1801 South Nottawa Road
Sturgis, MI 49091
(800) 233-4823
MORGAN OLSON
Rearview Mirror System - SERVICE MANUAL
6647RSSPH / 6647LSSPH
HEATED MIRROR REPLACEMENT
Replace mirror heads when glass is broken, or when the heating
element fails to heat the glass. The following steps apply to either a
flat or convex mirror head.
Step 1: Pull out black grommet and cable from oval hole, and
expose butt spliced connections. Cut wires as shown.
Step 2: Remove 5/16-18” hex head screw and lock washer to
disassemble defective mirror head. Remove defective mirror
head. Ensure that remaining mirror head harness stays in place.
Step 3: Loosely attach new mirror head to the clamp. Run heater
harness through the oval into the tubular arm until the end
reaches the other oval hole.
Step 4: Using provided butt splices, crimp black and white wires
accordingly. Push wires inside the tubing towards the flattened
end and re-attach oval grommet.
Step 5: Tighten mirror head hardware on the clamp to 200 in.
lbs. be sure that clamp location on the tube is correct per below
diagram:
6
7