Quick Start
6
To install pedals, you must use a wrench(15mm):
Pedal to the left leg tighten counterclockwise,
pedal for the right foot - clockwise.
7
Before first use of bicycle you must charge the battery.
Connect the power port with the battery output plug.
Power On/Off
Hold down the Power button and the display will switch on and light
up (if the battery has been switched on...). Hold down the Power
button again and the display will switch off.
Walk assist mode
Press and hold the DOWN button for 2 seconds and your e-bike
motor will start to run at a uniform speed of 6 Km/h.
Led Backlight (Front light)
Press UP for 2 seconds to turn on the backlight of the display.
HoldUP again for 2 seconds and the light is turned off.
Power assistance selection
Use the UP and DOWN buttons to change the assistance provided
by the Motor. The power ranges from level 1 to level 5.
Access the settings
For access settings, please contact the seller directly for full
instructions.
8
Switch on/off the bicycle
M
Power Button
UP
DOWN
5
