Moretti SKEMA FORM, Инструкция по эксплуатации

Страница: 19 / 36

7
ENGLISH
Pictures 7
Pictures 8
5. At this point, screw the self-thread screws (ref.E) by the side legs holes on the platform
6. Tighten them securely keeping the leg upright during this operation
7. At this point tighten well the frame screws previously assembled
8. Now your step stool MI482 is fully assembled and ready for use (pictures 8)
9. HOW TO USE
Choose the type of the step stool according to the height of the person who has to get on the
bed. Place the step of SKEMAFORM line by Moretti on a firm and leveled surface to the side of
a bed. Adjust the height of the back legs using the adjusters. Get on to the step with the aid of
the hand placed on the bed. To get off, use the same procedure.
CAUTIONS!
• Do not exceed the maximum load of 150 kg
• Before use, always make sure that the step stool SKEMAFORM is securely assembled
and hasn’t any damage that could compromise the stability of the product.
10. MAINTEINANCE
The MOPEDIA devices by MORETTI are checked carefully and supplied with EC mark, once
launched on the market.
For patient and physician’s safety we recommend to let check the device by the manufacturer
or by an authorized laboratory every 2 years. In case of repair, use only original spare parts and
accessories. More specifically, please check that all screws and bolts are well tightened.
11. CLEANING AND DISINFECTION
11.1 Cleaning
To clean the step stool use a solution of alcohol and neutral soap (in equal parts) mixed with
water.
11.2 Disinfection
If you need to disinfect the product use a common disinfectant neutral detergent.
N.B. Never use acids, alkalines or solvents such as acetone or diluent. Keep away from light,
moisture, heat.