21
ENGLISH
ENGLISH
8.6 Elastic adjustable backrest (CP790-xx)
The backrest for model CP790-xx is elastic and adjustable to facilitate the containment of
the trunk. To adjust the tension of the backrest:
• Remove the cushion from the backrest;
• Loosen the Velcro straps;
• Position the patient to allow more winding trunk;
• Close bands;
• Reposition the cushion back.
8.7 Adjust the footplate (CP780-xx, CP785-xx, CP790-xx)
To adjust the angle of the footplate:
• Loosen the screw located on the outside of footplate
(FIG. 7)
• Adjust the angle of the footplate;
• Tighten the screw.
(FIG.7)
Image for illustrative purposes only
8.8 Adjust the height of rear wheels (CP780-xx, CP785-xx, CP790-xx)
To adjust the height of the rear wheels:
•
Remove the wheels through the quick release;
•
Loosen the screws of the wheels adapter
(FIG. 8)
•
Place the wheels adapter at the desired height;
•
Tighten the screws and the nut;
•
Reposition the wheels.
WARNING!
The adjustment of the wheelchair must be performed
by qualified personnel to assess its suitability
and correct configuration
(FIG.8)
Image for illustrative purposes only
8.9 Adjust the front wheels (CP780-xx, CP785-xx, CP790-xx)
To change the height of the front wheels:
•
Loosen the screw which locks the wheel to the fork
(FIG. 9)
;
•
Remove the wheels and the screw;
•
Choose the desired hole;
•
Insert the wheels and tighten the screw and the nut.
(FIG.9)
Image for illustrative purposes only
8.10 Adjust the depth (CP790-xx)
To adjust the depth of the seat:
•
Unscrew the 4 screws that lock the vertical support to the seat
and to the lower frame
(FIG. 10)
;
•
Move the seat support forward or back as needed;
•
Screw the screws in the right position;
•
Adjust the seat by increasing or reducing the seat available
through the Velcro strips.
(FIG.10)
Image for illustrative purposes only