3. PHASE CONTROL
The phase control allows phase adjusting of the subwoofer to match that of the other speakers in your home
theater system. With the system turned on, turn the phase control first to 0° then to 180°, and leave it in the
position at which the bass level in your room sounds strongest and deepest.
Solan MSP 10 subwoofer speaker connections
1. WIRELESS INPUT
For conecting subwoofer in wireless input, please see Morel's
Sub Wireless receiver manual (purchased separately).
2.
4. FREQUNECY CONTROL
The crossover control determines the range of frequencies your subwoofer will reproduce. When turned to 60Hz,
the subwoofer will only issue the lowest bass frequencies. As you turn the knob towards 140Hz, the subwoofer
will reproduce more high frequency notes (higher range). When the crossover control is adjusted correctly, the
subwoofer, together with the other speakers in your system, reproduces the entire range of frequency.
RCA INPUT JACKS.
The RCA input terminals of the subwoofer amplifier
(line in) connects via RCA cables the unit to your
amplifier/receiver subwoofer out if there is only mono output
from the amplifer, then use the R input for mono.
6. LEVEL CONTROL
The level control adjusts the bass level (volume) of your subwoofer.
Adjust your required level of bass relative to the sound reproduced by the other speakers in the system. The
bass level reproduced by the subwoofer will change as you modify the volume control setting on your
amplifier/receiver, maintaining the relative level set by this control.
3
10
50
LINE IN
LEVEL
0
WIRELESS IN
Hz
LF E
FREQUENCY
200
Hz
PHASE
0
180
120-240V~ 50/60Hz 1.6A
POWER
1
4
