Morbark TORNADO 13, Инструкция по безопасности, эксплуатации и каталог запасных частей

Страница: 16 / 48

*REFER TO CHECK SHEET FIRST 1/99
1 . Under no circumstances should any modifications be made without factory authorization. This
machine was designed to do a specific job and alterations could result in injury to the operator
or machine.
2 . Never leave one person to work at the job site alone. If an accident occurred, someone
could suffer or even die before help arrived.
3 . Keep bystanders away from the machine during operation. Only the operator should be at the
machine.
4 . Be constantly aware of people and obstacles in your job area while operating the machine.
5 . Never change or work on the chipper knives unless you wear gloves. The knives are very sharp
and can seriously cut you.
6 . Always check the tail lights and turn signals before transporting machine.
7 . Never haul the machine without safety chains securely attached.
8 . Never smoke, weld or use any type of flame around the fuel tank.
9 . Remember, do not attempt any maintenance without first removing the ignition key and installing
the drum lock pin.
SAFETY HINTS
SAFETY OPERATION
As an owner or operator of a Morbark chipper,
you know what a useful tool it is. With anti-
burning and anti-burying regulations spreading
across the country, it is absolutely necessary
that we have brush chippers to dispose of and
recycle brush and wood waste.
It is equally necessary that we operate these
machines in the safest manner possible.
We have done all we can do to manufacture the
safest chipper possible that will still do the job it
is intended for. But no matter how we build it,
IT
CAN BE DANGEROUS IF IT ISN'T USED PROP-
ERLY.
It is the responsibility of the owner to ensure that
operators are properly trained and that they
practice safe operating procedures on the job.
These chippers are designed to give years of
service. Over the course of the life of the
chipper, it may have several owners and dozens
of different operators. It is vital that each new
operator be trained in safety and that even
experienced operators are given safety reviews
from time to time.
Safety is just too important to be taken lightly.
With proper information and commitment to safety
every day, your Morbark hand-fed chipper will
give you years of reliable, safe service.
With proper safety information and training, your Morbark
chipper will give you years of service.
1 3