Rev. 007–14.04. MA nr 1002685
Monteringsanvisning / Installation instruction
Mora Styxx
9 (12)
ENGLISH
We recommend that you engage a professional (licensed) plumber.
NB: On first installation, the pipes leading to the mixer must be thoroughly flushed clean
before the mixer is mounted. For IP64 compliant installations, also see the separate
installation manual for IP64 classified transformer MA no. 729424.
Freeze damage risks:
If the mixer will be subjected to external temperatures below 0°C (e.g. in an unheated
summer house), empty the water out of the mixer and the water supply lines. Leave the
mixer in the open position. Alternatively, you can disconnect the mixer and store it in a
heated place.
Assembly
A
Unscrew the battery compartment [1]–[2]. Remove the protective film on the battery
poles and connect the battery [3]–[6].
Assembly
B
Assemble the mixer [1]–[3]. Assemble the box upright. Position it so that none of the
connected tubes are fully stretched [4]. NB: The plug-in transformer must be installed in a
dry area with the outlet protected by an earth fault breaker.
Assembly
C
Connect the lead from the assembled mixer to the box in connector 3 [1]. Connect the tube
from the mixer as shown in the diagram [2]. Make sure that the tube is firmly inserted in
the supporting bush (about 25 mm). Remove the protective covers on the box and attach
the connection tubes for cold and hot water [3]. Attach the connection tubes to the infeed
pipe with the enclosed filter between the tube and pipe.
NOTE! Inlet filters must be installed in order for guarantees to be valid.
NB: When attaching the connection tube (soft PEX tube), the connector coupling to the
infeed pipe must be firmly fixed into place [4].
Connect the coupling from the transformer to connector 4 on the box [5]. Connect the
transformer to a mains socket [6]. Switch the box on and check that the status indicator
lights up green [7].
NOTE! Some dripping may occur after use.
SERVICE
S1.
Dismantling the box
Turn off the box on the switch. Press the lock inwards and pull the connector out of the
transformer. Press in the lock and pull the connector out of the nozzle. Detach the tube
from the tap by pressing the black part of the connector on the box while pulling the tube
outwards. Unscrew the tubes from the supply line.
S2.
Replace the nozzle
Unscrew the outer tube from the nozzle. Pull the inner tube straight backwards while holding
the nozzle.
S3.
Replacing the battery
Unscrew the battery compartment [1]–[2]. Remove the protective film on the battery poles
on the new battery and attach the battery [3]–[6].
The battery is charged while the faucet works with power supply.
After 6 hours of work with power supply, it is disconnected automatically for few minutes and
the faucet works with battery (this is for maintain the battery efficiency).
If the electricity is off in the house, with battery you can work about 24 Hrs with faucet in
stand-by position and 3Hrs with faucet on.
Disposal of disused products.
Electrical products and batteries must not be thrown in the household waste.
They must be correctly recycled according to prevailing laws and regulations.
According to prevailing directives, the battery in the product must be removed
(C - [10]) and appropriately disposed of separately.
The purpose of this is to protect the environment and save limited natural resources. Contact
your municipal authorities for information on the nearest recycling facilities and details about
recycling.
Cleaning
For cleaning surfaces with a chrome or stainless steel finish, use a neutral or slightly alkaline
(pH 6-9) liquid detergent and a soft cloth. Suitable detergents include soap solutions and
washing-up liquid (but not dishwasher detergent). Do not use organic solvents, alcohol-based
detergents or corrosive or abrasive detergents. To remove stubborn limescale deposits,
we recommend household vinegar (not pure spirit vinegar). Avoid contact with aluminium
chlorides (e.g. deodorants).
Disused products can be returned to Mora Armatur for recycling.
FAILURE / FAULT
POSSIBLE CAUSE
RECTICATION
No water running?
- Filters/corner valves closed
- Filters/corner valves blocked
- Hoses twisted/kinked
- Power supplier / socket faulty
- Mains unit faulty
- Connecting cable /connection lead between
spray head and control box faulty/damaged
- On/O button faulty /blocked
- Electronics faulty
- Open lters/corner valves.
- Clean lters/corner valves.
- Connect hoses correctly.
- Check voltage supply and socket.
- Replace mains unit.
- Check connection and if necessary call customer service.
- Check ON-button
- Contact customer service
Water running constantly?
- Electronics faulty
- Turn the faucet OFF and ON again. If problem
persists call customer service.
It does not divert?
- Areator blocked
- Spray head faulty
- Clean areator.
- Replace spray head.
Flowrate is too low?
- Supply line pressure too low
- Filters/corner valves not opened enough
- Filters/corner valves blocked
- Electro-valve faulty
- Check supply line.
- Open lters/corner valves further.
- Clean lters/corner valves
- Contact customer service.
Water temperature cannot
be set?
- Water supply failure or temperature dierence
between hot and cold water suppl line too low
- Filters/corner valves dirty
- Electronics faulty
- Spray head control pad faulty
- Check water supply.
- Clean lters/corner valves.
- Contact service.
- Replace spray head.
Dripping?
- Electronics faulty
- Turn the faucet OFF and ON again. If problem
persists call customer service.
Lime forming on the faucet?
- Water contains high level of lime
- Clean faucet, spray head and face plate
after use and rub dry.
The tap nozzle does not
change to shower mode?
- The jet concentrator is blocked.
- Electronic defect in the tap nozzle.
-Check that the filter is fitted on the CW/HW inlet.
- Clean the jet concentrator.
- Replace the tap nozzle.
The green light on the control
box is flashing.
- The mixer is only running on battery and there is no
power supply to the control box. Check the voltage
(15 V DC).
- Low voltage in battery.
- Transformer not connected or defective.
- Charge or replace battery.
