Mopedia RP682, Инструкция по эксплуатации

Страница: 17 / 36

5
ENGLISH
6. SYMBOLS
Product code
Unique Device Identification
CE mark
EC REP
0197
S N
Manufacturer
Batch Lot
Read the instruction manual
Medical Device
Conditions of disposal
7. BEFORE USE
Before using the device, always check:
1. That all parts of the rollator are locked in a secure manner.
2. Check that all screws are tight.
3. Make sure that the seat is properly locked
(if that ‘not press further with the power seat bottom frame).
4. Check that the locking of the seat is correctly inserted.
5. Check the correct operation of the brake and the regular brake.
8. ASSEMBLING INSTRUCTION
8.1 Before assembling the product
Unpack the product and check that no damage has occurred during shipping. In the event when
the rollator is damaged, please contact your nearest dealer.
8.2 Assembling model RP682
- Open the rollator pulling the front part by leveraging on the legs.
- Place the handle tubes in the frame.
- Turn the locking knobs until they are locked.
- The hexagonal hole is needed to accommodate the screw head
8.2.1 Folding the rollator
Make lever on the lateral bars and bring back the front of the rollator.
8.2.2 Adjustment of the handles
Adjust the height of the handles using the side knobs. Unscrew the knob, pull out the screw place the
handles to the desired height, turn the knob clockwise to tighten and fasten it again. Repeat for the
other handle and make sure that both handles are positioned at the same height.
WARNING!
Make sure that the handle is in line with the direction of movement of the
rollator. If the handle does not stay straight, there is a risk that the rollator
wobbling or tipping over, especially if you push it harder