16
59. Connect the two tethers to the Dpillar trim panel (1).
60. If equipped, connect the speaker electrical connector
(2).
61. Position the trim panel (4) back and engage the lower
tabs (4) into the upper quarter trim panel.
62. Position the panel back onto the pillar and seat the re
taining clips (3) fully.
63. Connect the tether to the trim panel.
64. Position the driver side upper side trim (1) and seat
the retaining clips fully.
65. If equipped, connect the cargo lamp (2) electrical con
nector.
66. Position the trim (3) into place inserting the outer clips
first then the inner ones.
67. Seat the retaining clips fully.
Dec 30, 2010
KK6861240 Rev.1
