14
47. Install the driver side lower Bpillar trim panel (1) to the
Bpillar.
48. Position the driver front door seal (1) back and seat
fully.
49. Position the driver side quarter trim panel (1) back into
the vehicle.
50. Position the front locating pin into the body and seat
the push pin near the location pin fully.
51. Seat the clip at the top of the trim panel into the Cpillar
first.
52. Seat the two front push pins.
53. Seat the push pin at the rear of the quarter glass.
54. Connect the flash light electrical connector (2) and the
power liftgate switch, if equipped.
55. Position the rear locating pin into the body and seat
the remaining push pins.
Dec 30, 2010
KK6861240 Rev.1
