11
ALL MODELS
1.
Remove the push pin fastener (3) and separate the
retaining clips (1).
2.
Remove the cowl trim (2).
3.
Route the antenna cable (1) from the radio opening
along the glove box opening.
4.
Continue routing along the scuff plate and up the Bpil
lar to the antenna mounting location.
5.
Disconnect the antenna connector (1).
6.
Remove the antenna fastener and remove antenna
(2).
7.
Install the new antenna (2). Tighten the antenna re
tainer to 9 N∙m (80 in. lbs.).
8.
Connect the antenna connector (1).
Dec 31, 2010
K6861157 Rev. 1
