Position tie downs toward bed center. Insert Item B into the
Utility Track as shown. Repeat for other side.
2A
If the track assembly can not be slid into the utility track easily (due to metal
burrs in the track), disassemble Item B by removing the screws and the
3 sets of nylon adaptors and spacers per side and proceed to Steps 2B, 2C, 2D.
Slide lower
adaptors into
utility tracks.
3
2B
Slide black track
to a position about
1-3mm from
front of truck
Reposition black
metal rail over lower
utility track with the
three inserts in line
with the holes in
the black metal rail.
Insert screws and
tighten.
2C
2D
Replace
end caps,
both sides.
1. Position tonneau cover onto the top of the pickup box.
See Figure at left.
2. Align the front edge of the cover even with the front
edge of the front bed rail and evenly position the cover
so that it is centered on the truck bed from side to side
3. Lower the front clamp from its storage position.
4. Proceed to 3B for the correct way to latch tonneau to
cargo rails.
Installing the tonneau cover on the vehicle
Installing the tonneau cover on the vehicle
Attach the front clamps to the cargo rail
Attach the front clamps to the cargo rail
Center tonneau cover over the side rails
on inside of pickup truck bed
3x
3x
1-3mm
B
This end must face the
tailgate on all 3 pieces,
both sides
V
K6860665
3A