5
E. Locate the Pink/Red wire in pin #5 of
the grey 10-way multifunction switch
connector, found above the steering
column. Center-splice the harness Yel-
low wire into this wire, following the
center-splice procedure.
Parking Light Connection
B. Connect the harness 10-way female
connector to the vehicle’s ignition
switch.
C. Connect the harness 10-way male
connector to the vehicle’s 10-way
ignition connector previously removed
from the ignition switch.
Ground
D. Using a supplied 1/4” screw, secure the
black ground wire with ring terminal to
metal in left kick panel area as shown in
diagram.
Custom Harness Installation
Ignition switch connector
A. Locate ignition switch connector, directly
behind the ignition switch. Release the
red secondary lock. While pushing on
main release, remove connector from
ignition switch.
Center-splice Procedure
