Manual Part No: 931798-01 MV1 Gas GP Oven
- 16 –
Manual Rev No: 1
Users Instructions (cont.)
Oven
Lighting Instructions:
Open the oven doors. The oven burner is visible with the spark electrode and thermocouple secured to
it.
1)
Open the oven door.
2)
Turn the thermostat knob (B) anti-clockwise to the ignition position
Ξ
and at the same time press
the spark ignition button on the front of the oven base to generate a spark.
3)
Keep the thermostat knob depressed for a further 20 seconds until the flame is established.
4)
If the flame is extinguished on releasing knob, wait 3 minutes then repeat steps 2 & 3.
5)
When the flame is established, turn the thermostat knob (B) to the required setting and note the
burner comes
FULL ON
. Close the oven door securely.
When setting the thermostat knob to the required temperature, turn the knob to Mark 9 (maximum)
AND
THEN
back to the required setting.
NOTE!
When first lighting the appliance or after installation or after an extended shut-down period, it
may be necessary for gas control knob to remain pushed in for some time before burner will light, owing
to the presence of air in gas line.
To Turn Off:
Turn the thermostat knob (B) clockwise to the “
OFF
” position.
