Moorwood Vulcan MLE60R-F-RS, Руководство пользователя

Страница: 31 / 34

Service and Maintenance Instructions (cont.)
To Check A Rectangular Hotplate Element (cont.)
To check a hotplate to ensure that the switches and elements are wired correctly:-
1)
With the horizontal control panel removed, pull forward the neon bracket and switch plate to
expose the 6 heat switch/es.
2) Connect a multimeter to the switch connections P1 and P2, set it to read the resistance in ohms
and check the switch positions are as follows:-
1 2 3 4 5 6
Ohms 192 115 77 38.4 25.6 19.2
Watts 300 500 750 1500 2250 3000
Amps 1.25 2.1 3.1 6.2 9.4 12.5
To Change A Circular Hotplate Element
1)
Lift the hotplate and invert on top of the adjacent plate, taking c are not to strain the flexible
connection.
2) Remove the heat shield cover (two self tapping screws).
3) Disconnect element wires.
4) Remove the element (one nut).
5) Replace element and reverse the above procedure.
To Change A Six Heat Switch
1)
Remove horizontal control panel (two screws).
2) Undo the two screws and pull forward the neon bracket and switch plate complete with
switch.
3) Disconnect switch and remove.
4) Replace switch and reverse the above procedure.
Manual Part No: 930158-01
MD Electric Range - 31 –
Manual Rev No: 1