Manual Part No: 930158-01
MD Electric Range
- 28 –
Manual Rev No: 1
SERVICE AND MAINTENANCE
ENSURE THAT THE ELECTRICITY SUPPLY TO THE APPLIANCE HAS BEEN TURNED OFF BEFORE
DISMANTLING ANY COMPONENTS.
Maintenance
MUST
only be carried out by a competent person.
Routine Maintenance Procedures:
1)
Turn
ON
the electricity supply to the range and check that the green neon is alight.
2)
Turn
ON
the oven thermostat and check that the oven amber neon is working. Open the oven
door and leave the thermostat
ON
just long enough to check that the 3 elements (2 elements on
the 600 range) are working.
3)
Check the door movement and the door catch.
4)
Check that the door seal is satisfactory.
5)
Check that the phial of the thermostat and the capillary are located in the bracket on the RH side
of the oven and that there is no sign of overheating or mechanical damage.
6)
Operate each of the hotplate control knobs and check that the corresponding element is
working,
DO NOT
leave the hotplates turned on so they get too hot to work on.
7)
Turn
OFF
the electricity supply.
8)
Remove the RH control panel. Check the wiring within the control compartment for any sigh of
overheating, ingress of moisture or grease and that the terminations to the thermostat and
contactor etc. are secure.
9)
Turn over the centre hotplate and remove the perforated cover plate. Examine the wiring for
excessive overheating, ingress of moisture or grease. Examine the flexible conduit for damage.
NOTE:
REPEAT THE ABOVE STEP WITH EACH HOTPLATE IF THERE IS ANY SUSPICION OF ANY
PROBLEMS ON THE FIRST HOTPLATE.
10)
Unscrew the two screws holding each neon bracket and switch plate, carefully pull forward and
check the wiring for overheating and ingress of moisture. Check the 6 heat switch contacts and
the tightness of the terminals.
11)
Replace and defective components and wiring etc. found on the examination.
12)
Check each hotplate to ensure that the switches and elements are wired correctly.
13)
Replace all components and control panels.
14)
Turn
ON
the electricity supply.
15)
Re-check the operation of the oven and if required, check the thermostat calibration.
16)
Ensure that all panels are fully screwed in position and turn
OFF
the electricity supply.
Содержание MLE60R-F-RS
