Moore 240G, Инструкция по эксплуатации

Страница: 28 / 49

Maintenance
A : Wear Check
e)
These checks should be regularly repeated, especially when the seed drill has been used on hard
or stony soil.
Checks
Wear check
- of coulters (1)
Coulters are the essential furrowing part and must retain aggressive shape. Coulters can be rebuilt with
suitable welding rods before wear becomes too pronounced.
- of seed drill arm rear guides (2)
NEVER LUBRICATE.
- turn or replace the plates as soon as their thickness is significantly reduced.
Tightening check
- After 10 hours of operation:
Check the tightening of the furrowing system screws: disc securing screws and check tapered roller
bearings.
If those taper roller bearings have play, they should be tightened:
- Remove the dust cover
-
Tighten the ¾” UNF Flange nut with a torque wrench,
do not exceed 120N/m
-
After 20 hours of operation : Check the tightening of the main nuts.
-
Periodically check wheel rim tightening and tyre pressure:
Tyres – 10.5 x 15 (240G) : 2 bar
- 19.0/45-17 (300G) : 1.5 bar
28