Moore Industries WLM, Руководство по установке

Страница: 26 / 30

26 The Interface Solution Experts
WLM
Operating
Frequency
2.4-2.483GHz
Range: Up to 10 miles
(15km), using
2.4-2.483GHz units using
omni directional antennas)
Output Power:
500mW maximum (10
programmable steps from
100mW to 500mW)
(+27dBm)
Modulation: Spread
Spectrum, GFSK
Spreading Code:
Frequency Hopping
Hop Patterns:
15 (user-selectable)
Occupied Bandwidth:
230kHz
Sensitivity:
-108dBm@10-6 raw BER
Selectivity: 40dB@fc
±230kHz
System Gain: 135dB
Error Correction:
32-Bit CRC
Data Encryption:
Substitution Dynamic key
RF Data Rate:
144-188kbps
10Base-T (UTP); one
straight, one cross-pinned
(only one connector can be
used at a time)
Data Throughput:
108 kbps in point-to-point
mode; Data throughput
measured assuming 75%
frequency availability
Connectors:
10Base-T for
communications; DB9 for
configuration
Standard thread SMA
female; supplied bench test
antenna; optional external
omni directional or Yagi
antenna available
Input Voltage
Requirements:
10-28Vdc
RF Output Power: 0.1 to
500mW (selectable in nine
step increments) for a
2.4-2.483GHz unit
Connector: Standard
24V connector
Transmit Current
(Peak):
700mA@12Vdc
for 1W
Receive Current:
100mA@12Vdc
Point-to-Point, Point-to-
Multi-Point, Store-and-
Forward Repeater,
Repeater/Remote
Front Panel LEDs:
Power, RF Link, RF In,
RF Out, LAN In, LAN
Out, LAN Link, LAN
Collision, Overrun Error
Serial Port Data: Stored
signal strength, noise and
disconnect information
Standard Temperature:
-40° to +75°C
(-40° to +167°F)
Humidity: 0 to 95%
non-condensing humidity
1.13 kg (2.5 lbs.)
Power
Receiver
Operating
Modes
Diagnostics
Operating
Environment
Weight
Transmitter
RF Data
Transmission
(continued)
Antenna
Interface
Power
(continued)
WLM Wireless Link Module
Ethernet Interface
Indicators
Specifications
RF Data
Transmission