Page 6
DPS
66mm
(2.59 in)
80mm
(3.15 in)
94mm
(3.89 in)
93mm
(3.65 in)
103mm
(4.05 in)
OPTIONAL
ENGRAVED TAG
FOR CUSTOMER I.D.
15mm
(0.59 in)
32mm
(1.28 in)
TS-32
G-RAIL
9mm
(0.35 in)
SPRING
FLANGE
Figure 2. Outline Dimensions for the DPS 240
Electrical Connections
Figure 3 shows the front panel of the DPS 240 in de-
tail, and depicts its electrical connection in a typical
application.
For information on the Moore Industries products that
typically work with the DPS 240, contact your local
sales representative, or Moore Industries’ Customer
Service Department.
The use of 14-22 AWG insulated copper wire is rec-
ommended in connecting the DPS 240 terminals.
To avoid transients and stray pick-ups, it is recom-
mended that twisted conductors be used when run-
ning close to other services. To ensure good contact,
strip 5/16 to 3/8 inches of the insulation from the end
of the wire.
To connect the DPS 240, loosen the clamping screw
of the appropriate terminal, and insert the uninsulated
end of the wire into the socket. Tighten the screw
while holding the wire in place. Finally, tag the wire
for identification. Once supplied with the appropriate
ac power, the DPS 240 will begin to operate.
