30
Rev. 1.0
10/19/2018
SSDC-A Hardware Manual
400-820-9661
4 Mounting the Drive
Use the M3 or M4 screw to mount the SSDC series drive .The drive should be securely fastened
to a smooth, flat metal surface will help conduct heat away from the chassis. If this is not possible,
forced airflow from a fan maybe required to prevent the drive from overheating.
•
Never use the drive in a place where there is no air flow or the surrounding air is
more than 40
℃
.
•
Never put the drive where it can get wet or where metal or other electrically
conductive particle particles can get on the circuitry.
•
Always provide air flow around the drive. When mounting multiple SSDC drives near
each other, maintain at least 2cm of space between drives.
5 LED Error Codes
Code
Error
Solid green
No alarm, motor disabled
Flashing green
No alarm, motor enabled
1 red, 1 green
Position limit
1 red, 2 green
Move while disabled
2 red, 1 green
CCW limit
2 red, 2 green
CW limit
3 red, 1 green
Drive over temperature
3 red, 2 green
Internal voltage out of range
3 red, 3 green
Blank Q segment
4 red, 1 green
Power supply over voltage
4 red, 2 green
Power supply under voltage
5 red, 1 green
Over current
5 red, 2 green
Current foldback
6 red, 1 green
Open winding
6 red, 2 green
Bad encoder
7 red, 1 green
Communication error
NOTE: Items in
bold italic
represent drive faults, which automatically disable the motor.
