FEATURES:
52.00mm diameter circular Digital LCD display
Measure-during-inflating Technology
Up to 99 pieces of record stored per each user
General Description
The signs below might be in the user manual, labeling or other components.
They are the requirement of standard and using.
Safety Information
T1A/250V Φ3.6*10CCC
Indications for Use
The moon Blood Pressure Monitor is digital monitors intended for use in
measuring blood pressure and heartbeat rate with arm circumference ranging
from 22 cm to 32 cm (about 8¾˝-12½˝) or 22 cm to 42 cm (about 8¾˝-16½˝).
It is intended for adult indoor use only.
Symbol for “ENVIRONMENT
PROTECTION - Electrical waste
products should not be disposed of
with household waste. Please recycle
where facilities exist. Check with your
local authority or retailer for recycling
advice”
SN
Symbol for “TYPE BF APPLIED
PARTS”
Symbol for “THE OPERATION
GUIDE MUST BE READ”
Symbol for “MANUFACTURER”
Symbol for “SERIAL NUMBER”
Symbol for “DIRECT CURRENT”
Symbol for “MANUFACTURE
DATE”
Caution: These notes must be
observed to prevent any damage
to the device.
Symbol for “RECYCLE”
Symbol for “Class II Equipment”
For indoor use only
F1
Thank you for selecting moon arm type blood pressure monitor
(LC-BP01). The monitor features blood pressure measurement, pulse
rate measurement and the result storage. The design provides you with
two years of reliable service.
Readings taken by the LC-BP01 are equivalent to those obtained by
a trained observer using the cuff and stethoscope auscultation method.
This manual contains important safety and care information, and
provides step by step instructions for using the product.
Read the manual thoroughly before using the product.
Contraindications
1.The device should not be used by any person who may be suspected of, or
is pregnant .
2.The device is not suitable for use on patients with implanted, electrical
devices. such as cardiac pacemakers, defibrillators.
Surface with a soft pillow for user measurement
Built-in six speech and the six languages
Measurement Principle
This product uses the Oscillometric Measuring Method to detect blood
pressure. Before every measurement, the unit establishes a “zero point”
equivalent to the atmospheric pressure. Then it starts inflating the cuff.
Meanwhile, the unit detects pressure oscillation generated by beat-to-beat
pulsatile, which is used to deter-mine the systolic pressure and diastolic
pressure as well as pulse rate.
INTRODUCTION
INTRODUCTION
2
3