background image

400M Neo 

Series

 

 

Important Safety Instructions 

(cont’d)

 

 

The lightning flash with the arrowhead symbol, within an equilateral triangle, is 
intended to alert the user to the presence of uninsulated “dangerous voltage” within 
the product’s enclosure that may be of sufficient magnitude to constitute a risk of 
electric shock to persons.  

 

The exclamation point within an equilateral triangle is intended to alert the user to the 
presence of important operating and maintenance (servicing) instructions in the 
literature accompanying the appliance. 

 

 

 

European Community

 

 

Marking by the “CE” symbol (shown left) indicates compliance of this device with the 
EMC  (Electromagnetic Compatibility) and LVD (Low Voltage Directive) standards of the 

Please read all instructions and precautions carefully and 
completely before operating your Nēo

 

400M  Power Amplifier. 

 

1.

 

ALWAYS

 disconnect your entire system from 

the AC mains before connecting or 
disconnecting any cables, or when cleaning any 
component. To completely disconnect this 
apparatus from the AC mains, disconnect the 
power supply cord plug from the AC receptacle. 

2.

 

The 

Nēo

 400M must be terminated with a 

three-conductor AC mains power cord which 
includes an earth ground connection. To 
prevent shock hazard, all three connections 
must 

ALWAYS

 be used. Connect the 

Nēo

 400M 

only to an AC source of the proper voltage; Both 
the shipping box and rear panel serial number 
label will indicate the correct voltage. Use of 
any other voltage will likely damage the unit 
and void the warranty 

3.

 

AC extension cords are 

NOT

 recommended for 

use with this product. The mains plug of the 
power supply cord  shall remain readily 
accessible. 

4.

 

NEVER

 use flammable or combustible 

chemicals for cleaning audio components. 

5.

 

NEVER

 operate the 

Nēo

 400M with any covers 

removed. There are no user-serviceable parts 
inside. An open unit, especially if it is still 
connected to an AC source, presents a 
potentially lethal shock hazard. Refer all 
questions to authorized service personnel only. 

 

6.

 

NEVER

 wet the inside of the 

Nēo

 400M with 

any liquid. If a liquid substance does enter your 

Nēo

 400M, immediately disconnect it from the 

AC mains and take it to your MOON dealer for a 
complete check-up. 

7.

 

NEVER

 spill or pour liquids directly onto the 

Nēo

 400M. 

8.

 

NEVER

 block air flow through ventilation slots 

or heatsinks. 

9.

 

NEVER

 bypass any fuse. 

10.

 

NEVER

 replace any fuse with a value or type 

other than those specified 

11.

 

NEVER

 attempt to repair the 

Nēo

 400M. If a 

problem occurs contact your MOON dealer. 

12.

 

NEVER

 expose the 

Nēo

 400M to extremely 

high or low temperatures. 

13.

 

NEVER

 operate the 

Nēo

 400M in an explosive 

atmosphere. 

14.

 

ALWAYS

 keep electrical equipment out of 

reach of children. 

15.

 

ALWAYS

 unplug sensitive electronic 

equipment during lightning storms. 

16.

 

WARNING:

 Do not expose batteries or battery 

pack to excessive heat such as sunshine, or fire 
or the like. 

 

Содержание 400M Neo Series















Отзывы: