Setting the computer IP address in Windows® 7 or Windows® 10
Seanet SCU v5
0581-SOM-00002, Issue: 05
31
© Tritech International Ltd.
A list of attached network devices should now present itself. Find the one which the Gemini
head is to be connected to and double-click on it.
The
Local Area Connection Properties
dialog should be displayed. Find the entry
labelled
Internet Protocol Version 4 (TCP/IPv4)
, select it and then click on the
Properties
button.
In the properties dialog which opens there will either be
Obtain an IP address
automatically
or
Use the following IP address
selected. If an IP address is
already present, make a note of it before changing any values since it will be needed if the
computer is ever restored to the previous network. Refer to appropriate section of this manual
for the correct IP addresses to use.