Moog Tritech Seanet SCU v5, Руководство по эксплуатации продукта, Страница: 27 / 33

SCUv5 Communications Setup Seanet SCU v5
0581-SOM-00002, Issue: 05 27 © Tritech International Ltd.
Single SeaKing Sensor in RS232
The V5 SCU can support direct connection of a single node to a dedicated RS232 port.
Connection can be made through the DA-15 connector (if it is wired for RS232
communications) or through one of the standard DE-9 ports, such as PORT A shown above.
This configuration is single head so subsea networking is not possible.
Multiple Sensors Connected to the SCU
The connection of multiple serial sensors to a single V5 SCU is possible. Each sensor must
feed into the SCU on its own port:
Connection should be made through the DE-9 connectors A through D, each wired for serial
communications as shown in Appendix A,
Data and Control Ports
(the chosen serial standard,
RS232, RS422 or RS485 will depend on the sensor in use - note that only port B can use
RS422.