Moog Components Group
Mini4, Rev C
February 23, 2009
(201580-xxx And 201590-xxx)
Page 9 of 19
JP2
: RS-485/RS-422 Selection for channel 6
1 o o 2
1 o o 2
| |
for RS-485
for RS-422
3 o o 4
3 o o 4
JP3
: RS-485 Receiver Termination Enable for channel 6
1 o o 2
Not terminated 1 o= =o 2
Terminated
JP4
: RS-485/RS-422 selection for channel 5
1 o==o 2
1 o o 2
for RS-485
for RS-422
3 o==o 4
3 o o 4
JP5
: RS-485/RS-422 Selection for channel 5
1 o o 2
1 o o 2
| |
for RS-485
for RS-422
3 o o 4
3 o o 4
JP6
: RS-485 Receiver Termination Enable for channel 5
1 o o 2
Not terminated 1 o= =o 2
Terminated
1.3.2 Mini4 Video Output Board Indicator and Controls
LEDS: There are 21 surface mount (SMD) LED indicators on the Mini4 Video Output board to indicate
different statuses that are covered by function below.
NOTE: The LEDs below are on the latest version of the 201590 PCB – REV C.
Top of Board
LED
Indication
D1 (Green)
Located at the top left of the board serves as an indicator that 5V or 3.3V dc
is available to the daughter board connector, J2. Supply voltage 5V or 3.3V to the
daughter board is selected via the placement of fuse F6 (3.3V) or F5 (5V)
D3 (Green)
Located on the top middle of the board, labeled ‘FIBER’, provides an indication that
the transceiver module has detected the presence of an input signal on the fiber link.
When ‘ON’ indicates that this board has a good level of received optical power from
