Moog Components Group
Mini4, Rev C
February 23, 2009
(201580-xxx And 201590-xxx)
Page 13 of 19
R4_LED
17 o o 18
T4_LED
R5_LED
19 o o 20
T5_LED
R6_LED
21 o o 22
T6_LED
RDIAG_LED
21 o o 22
TDIAG_LED
NOTE: J11 header is located at the bottom center side of the board.
Pin 1 is the upper right pin – as identified by a square pad.
NOTE: J11 header is to be with a PRIZM display board only.
Contact PRIZM if details are required.
J12
ISP Header
+3.3V
1 o o 2
TMS
TCK
3 o o 4
TDI
N/C
5 o o 6
TDO
GND
7 o o 8
NOTE: J12 to be used only bye PRIZM.
JUMPERS
:
There are 6 jumpers on the Mini4 Video Output Board.
(PIN 1 DENOTED BY SQUARE PCB PAD)
JP1
: RS-485/RS-422 selection for channel 6
1 o==o 2
1 o o 2
for RS-485
for RS-422
3 o==o 4
3 o o 4
JP2
: RS-485/RS-422 Selection for channel 6
1 o o 2
1 o o 2
| |
for RS-485
for RS-422
3 o o 4
3 o o 4
JP3
: RS-485 Receiver Termination Enable for channel 6
1 o o 2
Not terminated 1 o= =o 2
Terminated
JP4
: RS-485/RS-422 selection for channel 5
1 o==o 2
1 o o 2
for RS-485
for RS-422
3 o==o 4
3 o o 4
