Moog MSD C2, Руководство по эксплуатации

Страница: 51 / 72

51
MSD Single-Axis Servo Drive Compact Operation Manual
ID no.: CA97555-001 Date: 04 /201 8
moog
Example configuration of the subnet mask
In this example the subnet mask is changed from 255.255.255.0 to 122.255.255.0.
NOTE:
Changes on the IP address menu are only applied when the control
electronics are subsequently restarted.
5.4.5 Ethernet IP address menu (IP)
An Ethernet TCP/IP port is available as a service and diagnostics interface. The IP
address is set by default to 192.168.39.5 and the subnet mask to 255.255.255.0. Both
can be changed using the IP address menu.
Menu level Pa-
rame-
ter
Value
range
Meaning
Explanation
1 2
IP
Iu b0 00..FF IP address
update byte 0
Setting for byte 0 of the IP address in hexadeci-
mal format
(e.g. "05" for 192.168.39. 5 )
b1 00..FF IP address
update byte 1
Setting for byte 1 of the IP address in hexadeci-
mal format
(e.g. "27" for 192.168.
39
.5)
b2 00..FF IP address
update byte 2
Setting for byte 2 of the IP address in hexadeci-
mal format
(e.g. "A8" for 192. 168 .39.5)
b3 00..FF IP address
update byte 3
Setting for byte 3 of the IP address in hexadeci-
mal format
(e.g. "C0" at 192 .168.39.5)
Ir - - IP reset to
factory setting
Reset IP address to factory setting
(192.168.39.5)
Su b0 00..FF Subnet mask
update byte 0
Setting for byte 0 of the subnet mask in hexadec -
imal format
(e.g. "00" at 255.255.255.
0
)
b1 00..FF Subnet mask
update byte 1
Setting for byte 1 of the subnet mask in hexadec -
imal format
(e.g. "FF" at 255.255. 255 .0)
b2 00..FF Subnet mask
update byte 2
Setting for byte 2 of the subnet mask in hexadec -
imal format
(e.g. "FF" at 255.
255
.255.0)
b3 00..FF Subnet mask
update byte 3
Setting for byte 3 of the subnet mask in hexadec -
imal format
(e.g. "FF" at 255 .255.255.0)
Sr - - Subnet mask
reset to
factory setting
Reset subnet mask to factory setting
(255.255.255.0)
Table 5.10 IP address menu