2
II. PANEL MODE:
Menu numbering scheme:
2.1 T.S. Reduction
2.2 Ext. Audio Pot
2.3 Real Panel Param (used to be in EDIT mode under REAL PANEL CONTR)
2.4 LCD Contrast (used to be in Master Mode)
2.1 T.S. REDUCTION
T.S. Reduction thins the number of MIDI CC’s sent by the Touch Surface inputs
when more than one is used at a time. The amount of MIDI data produced by
these inputs can be immense, and can crash lesser MIDI devices.
2.2 EXT. AUDIO POT
This allows the External Audio Pot to scroll through the presets. It is a faster way
to change presets instead of using +/- buttons. When this is on, turning the
External Audio control changes the preset number in the display. Press ENTER to
load a new preset.
2.3 REAL PANEL PARAM
Real Panel PARAM is a function that enables the operation of the Voyager from
the front panel. To use this function, enter PANEL MODE by pressing the PANEL
button. Press the +1 key to highlight REALPANEL PARAM and press ENTER. The
screen prompts: “Load the actual Panel Parameters Yes/No?” Use the CURSOR
button to select Yes and press ENTER. The sound produced when the keyboard is
played is now determined by the settings of the front panel controls.
2.4 LCD CONTRAST
When this is selected, use the +/-1 buttons to change the LCD contrast.
Different angles of the front panel may require different contrast settings for
comfortable viewing of the display.
CHANGING BANKS
In PANEL mode, note the current Bank Number in the upper right corner of the
screen (B1 is Bank 1). Hold down the CURSOR Key and push the +/-1 buttons to
change banks. Note the text change to the Bank Number (B1, B2, B3…and so
on). Once inside the desired bank use +/-1 buttons to change presets. If the
PANEL mode function “Ext. Audio Pot” is on, use the External Audio Level control
to scroll through the presets. With this function, press ENTER to load a new preset.
The Voyager can receive Program Change messages only for the current Bank.
Presets can only be sent or received from the current Bank.
