background image

Protective gloves protect the hands from friction,

abrasions, cuts or deep wounds and from contact

with hot surfaces.

Protective work clothing

Protective work clothing is tight-fitting work clothing

with low tear strength, tight sleeves and no projec-

ting parts.

Safety shoes

Safety shoes protect the feet from crushing, from

dropping parts, and from slipping on slippery

floors.

3  Technical data

The technical data for the device, such as max-

imum pressure, flow, maximum rotational speed,

weight, torque values and other performance data

depend on the specific version. Refer to the type

plate, the order documents and any drawings

which may also be included for this information.

A data sheet is available for standard devices.

Drawings are available for special models.

3.1  Operating conditions

Environment

n

Temperature range: -20 to +80 °C

n

Maximum relative humidity, non-condensing: 0

to 80 %

n

Protection class as per type plate

3.2  Type plate

The type plate is situated on the housing. The type

plate differs depending on the specific device and

may contain the following information:

n

Manufacturer

n

Type

n

Item number

n

Serial number

n

Order number

n

Maximum pressure

n

Maximum speed

3.3  PV diagram

Rotopack • Operating instructions

 

 

10

Содержание GAT Rotopack BAT




























Отзывы: