MN00178
1359
Configuration / Video In / Video Input
Under the Configuration section, select the Video In tab to perform the following operations:
Digital format – choices are, 720 30fps, 720 60fps, 1080 30fps, 1080 25fps. Note max camera output with WDR Active is 15fps (1080p).
Configuration / Video In / Sensor
Configure camera bloc / sensor parameters. These parameters will also be saved to the camera bloc itself if possible
(Note: Activating WDR at 1080P will reduce maximum frame rate to 15fps.)
Configure video compression parameters for any of the three available codec instances (Primary H.264, Secondary H.264 and MJPEG). Most VMS software solutions will
interact with these parameters and thus it is suggested to leave these at default values in the web interface.
VBR aggressiveness however is unique to Moog EXO Cameras and proposes various levels (disabled to aggressive) of motion triggered rate control. The more aggressive
the setting, the more variation motion will have on the rate control. It is strongly suggested to disable VBR aggressiveness for low bit rate scenarios (below 1Mbps) as this
parameter may negatively affect perceived video quality.
