background image

- 7 -

!

!

SAFETY PRECAUTIONS

IMPORTANT SAFEGUARDS

1.  Read Instructions - All the safety and operating  in struc tions 

should be read before the unit is operated.

2.  Retain Instructions -  The safety and operating  in struc tions 

should be retained for future reference.

3. Heed Warnings - All warnings on the unit and in the operating 

instructions should be ad hered to.

4. Follow Instructions - All operating and user in struc tions  should 

be followed.

5. Electrical Connections - Only a qualifi ed electrician should make 

electrical connections.

6. Attachments - Do not use attachments not rec om mend ed by the 

product man u fac tur er as they may cause hazards.

7.  Cable Runs -  All cable runs must be within permissible 

distance.  

8. Mounting - This unit must be properly and securely mount ed to

    a supporting structure capable of sustaining the weight of the

    unit.  Accordingly:

                a. The installation should be made by a qualifi ed service person, 

and should conform to all local codes.

        b. Care should be exercised to select suitable hardware to 

install the unit, tak ing into account both the composition of 

the mount ing surface and the weight of the  unit. Be sure to 

periodically examine the unit and the sup port ing structure to 

make sure that the integrity of the in stal la tion is intact.  Failure 

to comply with the foregoing could result in the unit separating 

from the support structure and falling, with resultant damages 

or injury to any one or anything struck by the falling unit.

UNPACKING

  Unpack carefully.  Electronic components can be damaged 

if improperly handled or dropped.  If an item appears to have 
been damaged in shipment, replace it properly in its carton 
and notify the shipper.

  Be sure to save:
1. The shipping carton and packaging material.  They are 

the safest material in which to make future ship ments of 
the equipment.

2. These Installation and Operating Instructions.

SERVICE

   For service on Panasonic/Videolarm equipment contact:
    Panasonic Technical Center
     54 West Gude Dr.
    Rockville  MD   20850-1150

    Phone:  301-762-5125
    Fax:  301-251-0347

1-800-528-6747

9:00 AM - 5:00 PM EASTERN TIME

CAUTION:  TO REDUCE THE RISK OF 

ELECTRICAL SHOCK, DO NOT EXPOSE  

COMPONENTS TO WATER OR MOISTURE.

The lightning flash with an ar row head symbol, 
within an equi lat er al triangle, is intended 
to alert the user to the pres ence of non-
insulated "dangerous volt age" within the 
product's enclosure that may be of sufficient 
mag ni tude to con sti tute a risk of electric shock 
to persons.

The exclamation point within an equi lat er al 
triangle is intended to alert the user to presence 
of important operating and main te nance 
(ser vic ing) in struc tions in the literature 
ac com pa ny ing the ap pli ance.

PANASONIC TECHNICAL SUP PORT

CAUTION

RISK OF 

ELECTRIC SHOCK!

Содержание POD8C








Отзывы: