Connecting your ProFusion iS to your amplification equipment:
Always connect audio and video cables prior to powering on your ProFusion iS
1
Turn volume on your amplification equipment completely down and then turn power off before installing
your ProFusion iS.
2
Only plug your ProFusion iS power supply into a properly wired outlet which is in good working order.
Use of switched outlets, power strips and extension cords should be avoided.
3
To avoid being inadvertently powered off, never plug your ProFusion iS into a switched outlet.
Connecting ProFusion iS to Your Amplification Equipment:
1
Connect the white RCA plug of the audio cable into the RCA jack labeled Zone1/L on the rear
panel of your ProFusion iS. Connect the other white end of the RCA cable into the corresponding input of
your amplification equipment.
Note: If your ProFusion iS is configured for a single mono zone, use only the RCA jack
labeled Zone 1/L to feed your amplification equipment. The RCA jack labeled Zone 2/R is
active only when the ProFusion iS is configured to provide a single stereo zone or two
mono zones.
2
If your ProFusion iS has been configured with one stereo zone or two mono zones, connect the red RCA
plug of the audio cable to the RCA jack labeled Zone 2/R on the rear panel of your ProFusion iS. Connect
the other red end of the RCA cable to the appropriate input of your amplification equipment.
Connecting ProFusion iS to Your Network
Connecting your ProFusion iS to your company’s network:
1
Connect one end of a CAT5 Ethernet cable to the Ethernet port located on the rear
panel of your ProFusion iS.
2
Connect the other end of the CAT5 Ethernet cable to your network equipment (router,
hub, or switch).
It is highly recommended that a connectivity test is performed after changing any
network settings. See Testing the Network Settings for instructions.
Testing the Network Settings
Initiating a test connection from the title/artist information screen:
1
Press the * button to access the Control Panel menu system.
2
Press the NAVIGATION DOWN button until the current line indicator (>) is on Network
Control, then press the * button.
1703 W. Fifth Street
Suite 600
Austin, TX 78703
Toll Free: 800 345.5000
Fax: 512 380.8501
moodmedia.com
