17
www.DeubaXXL.de
PROBLEM
POSSIBLE CAUSE
SOLUTION
The power has
decreased.
1.
2. The trigger is obstructed.
3.
4. Air is leaking through a
loose casing.
5. The mechanism is
contaminated.
1.
with the required pressure.
2. Clean the area around the trigger.
3.
4.
securely.
5. The mechanism can be cleaned by a technician.
The casing gets
hot during use.
1.
2. Worn parts.
1.
2. The internal mechanism can be checked by a
technician, who may need to replace parts.
There is
leakage (slight
air leakage is
normal).
1. The casing is loose.
2. The valves and / or casing
are damaged.
3. Valves are dirty / worn /
damaged.
1. Tighten the casing. If it cannot be properly
aligned.
2. Replace damaged parts.
3. Clean the valve unit.
Maintenance/Cleaning
•
any maintenance or checks.
•
Check all parts for signs of wear. If any problems
are detected, do not use the product. Always
replace all parts with original replacements
according to the manufacturer’s guidelines.
•
If the product is not properly cared for and
maintained, it can become unsafe and can also
become damaged. This can lead to dangerous
•
Regular maintenance on the product helps to
make the product safe and will also increase its
lifespan.
•
Use a clean, dry cloth to clean the outer surface.
•
Make sure that the casing, air inlet and saw
blade are free from debris and dirt.
•
The trigger’s pivot point must be cleaned
regularly with a light machine oil.
•
Before the hose is connected for use, always
not use cleaning oil!
•
Before each use, check that the stop bracket
and saw blade are securely in place, otherwise
•
once a week during regular use.
The following table shows possible faults and
During maintenance, disconnect the device from
the compressed air supply.
Содержание 102748
Страница 39: ...39 www DeubaXXL de ...