Monument Grills 85030, Инструкции по сборке и эксплуатации

Страница: 17 / 21

5: Ignition Instruction
Before each ignition, please clean up the residual ash in the burning chamber. Then add new
fuel to the control box, it is better not to exceed the filter screen of the control box (about 2/3);
put small amount of new fuel into the burning chamber, and it is best that the fuel covers the
ignition rod 1~2 layers in a pyramid shape. Then put the fire-block plate, oil guide plate and
grilling grate and then close the cover, turn on the Power button and choose the required mode.
Not exceeding the
filter screen
igniter
The device begins to ignite. White smoke will be emitted during the ignition of the fuel, and
personnel can stay away from the operating device before the completion of the ignition.
What needs to pay attention is, to save power, the ignition rod will work only when the Cook
or Smoke mode is first selected after powering on, and it will not work in other conditions, so
if the fuel is found not ignited, you should turn off the Power button first and turn on the
Power button again and choose corresponding mode to ignite again.
4: Button Interface
Use Of The Pellet Grill
17