OPI-PulseNGKit-en-141106
Version: 2.01
Page 5 of 31
R
0 2 1 , 7 2 5 , 1 * 6 2 / 8 7 , 2 1 6
Operating Manual
PulseNG
Kit
Introduction
The
PulseNG
Kit serves as permanently installed diagnostic tool for machines and
machining centers.
In principle, the
PulseNG
Kit consists of the
PulseNG
sensor and the interface
IBU-NG. For further details, please refer to the technical specifications as listed in our
“BDS-
PulseNG
Kit-en“.
The software provided as user interface for the
PulseNG
monitoring system is titled
PulseNG
-hmi.
PulseNG
-hmi runs under Microsoft Windows XP
®
, Windows 7 and Windows 8.
PulseNG
-hmi provides process visualization for the different scenarios and serves to
check and set individual parameters and limits.
Valid up to
PulseNG
version 0.3.0 Build $Rev: 150$ R and Firmware version 013.
Product Certification
„This verifies that
PulseNG
-hmi can be installed on and operated with SINUMERIK
840D sl with SINUMERIK Operate 4.5 SP3 on PCU 50 with Windows 7.“
