MONTREL TECNOLOGIA ADR Multi 4000, Руководство по эксплуатации

Страница: 23 / 48

23
Tab
TOTAL
LIST
LINEAR
PHASOR
Value Descrip-
AVERAGE VPh [V]
AVERAGE VL V]
AVERAGE I [A]
TOTAL ACTIVE POWER [kW]
TOTAL REACTIVE POWER [kvar]
TOTAL APPARENT POWER [kVA]
TOTAL POWER FACTOR
VOLTAGE [V]
CURRENT [A]
ACTIVE POWER [kW]
REACTIVE POWER [kvar]
APPARENT POWER [kVA]
POWER FACTOR
FREQUENCY [Hz]
VOLTAGE [V]
CURRENT [A]
ACTIVE POWER [kW]
REACTIVE POWER [kvar]
APPARENT POWER [kVA]
POWER FACTOR
VOLTAGE [V]
CURRENT [A]
ANGLE [°]
PHASE SHIFT [°]
Instant average values
and totals recorded in
a table
Instant values by phase
recorded in a table
Instant values by phase
recorded in a linear chart
Instant values by phase re-
corded in a phasor diagram
and tables
Table 10-2 Metering organization.
After properly configuring the parameters, if the connection with ADR Multi 4000 is
active, click on “next” to start the test. If all mandatory fields are completed and the
minimum time for testing is above the pre-configured limit, then the application will
send the setting commands and data to the module, which, in turn, starts online
metering, with the possibility of browsing through the tables, charts, and diagrams
that record the instant values of the voltages, currents, and powers. Metering is
organized as shown in table 10-2.