22
•
Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak.
•
Some machines don’t have emergency drain hose, so step 2 and step 3 can be
skipped. Rotate filter counter clockwise to start the flow of water into basin.
•
When the appliance is in use and depending on the programme selected there can be
hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
Cleaning The Drain Pump Filter
•
Be careful of potential hot water
Allow the water to cool if hot
•
Unplug the machine to avoid electrical shock before washing.
•
Drain pump filter can filter the yarns and small foreign matters from the
washing.
•
Clean the filter periodically to ensure the normal operation of washing
machine.
Open the lower cover cap
Rotate 90° and pull out the
emergency drain hose.
Remove cap and drain water
into a suitable container
Open the filter by turning
counter clockwise
Remove any obstructions
1
2
3
Securely replace the filter and
close the lower cover cap
6
5
4
Emergency
drain hose
After water has drained,
replace the drain hose
Warning!
！
Caution!
MAINTENANCES
•
