9
IF THE ROOM TEMPERATURE IS BELOW +16 °C, we recommend that you set a
lower temperature with the temperature-selection button (1).
Cooling device on/off
SHUTDOWN. Tap and hold button 1 until the three temperature indicative segments are
blue, and the light in the refrigerator compartment turns off. CAUTION! Voltage remains
turned on.
SWITCHING ON. Tap and hold button 1 until the set temperature indication segment is
blue, and the refrigerator compartment lighting is on.
NOTE: after turning on the cooling device, the last temperature set by the user will be
saved.
2.
Temperature indicator segments. The temperature set-point segment is
illuminated in blue (active), while the other temperature value segments are grey
(inactive).
3.
The FAST FREEZE function is activated by tapping button 3 marked with the “S“
symbol. When the FAST FREEZE function is on, the white segment in the centre of the
button is on.
We recommend using the FAST FREEZE function when you are going to freeze large
quantities of fresh food. Turn on this function 24 hours in advance. Then put the food in
the freezer compartment section marked with the symbol
.
The FAST FREEZE function automatically shuts off when a temperature below –18 °C is
achieved.
Model MS310-2W (fig. 2)
The temperature in the refrigerator compartment is controlled using the thermostat
knob 1 (fig. 1) by turning it to one side or the other. The temperature indication in
digits is shown beside the thermostat knob.
The temperature is regulated on the scale of seven digits:
0 = Compressor is switched off. WARNING! Electric current is not switched off.
1 = highest temperature (lowest cooling)
7 = lowest temperature (highest cooling)
If foodstuffs in the refrigerator compartment are too cold, set the thermostat knob to 1,
2 or 3. If foodstuffs in the refrigerator compartment are not being chilled sufficiently, set
the thermostat knob to 4, 5 or 6. Please set the desired temperature in the
appliance according to your own requirements.
IF THE ROOM IS COOL, THE APPLIANCE COOLS LESS. THE TEMPERATURE
IN THE APPLIANCE MAY THEREFORE RISE. Use the thermostat wheel to set a
lower temperature.
