Safety
Information
Proper use of
Refrigerator
Maintenance of
Refrigerator
Trouble
shooting
Trouble
shooting
Appendix
EN-15
2.7 LEVELING DOOR
List of tools to be provided by the user
Cross screwdriver
Putty knife/thin-blade screwdriver
5/16”socket and ratche
Masking tape
Parts to be used for door reverse
SN
parts
Quantity Notes
1
Upper hinge
1
Pre-installed on the
refrigerator and to be
used when changing
the door
2
Upper hinge
cover
1
3
Hole cover
1
4
Reft stopper
2
5
Left stopper
2
In the attached plastic
bag, take them out
for use when door is
reversed
6
Middle hinge
1
Pre-installed on the
refrigerator and to be
used when changing
the door
7
Insert pin
2
8
Right lower
hinge
1
9
Left lower
hinge
1
In the attached plastic
bag, take them out
for use when door is
reversed
10 Levelling feet
1
Pre-installed on the
refrigerator and to be
used when changing
the door
11
Spacer
1
In the attached plastic
bag, take them out
for use when door is
reversed
•
Remove all food from the inner
door liner. Fix the door by tapes.
•
Dismantle top hinge cover, top
hinge and hole cap of the other
side.
Top hinge
Hole cap
Top hinge cover
•
Remove freezer chamber door as
well as middle hinge and hole cap
of the other side.
Hole cap
Middle hinge
•
Remove refrigerating chamber
door and dismantle bottom hinge
and adjustable foot.
Adjustable foot
Bottom hinge
•
Exchange the installation position
of bottom hinge and adjustable
foot, then fix them respectively.
Remove the hinge sleeve pipe of
the refrigerating chamber door,
and install it on the other side.
Remove the hinge sleeve pipe of
the freezing chamber door and
install it on the other side.
