7
Push the fan-shaped door frames to the end, in order to make the outer
edges of the door frames at the same vertical level as the outer edge of the
cupboards.
Connect the air-outlet board and the air-outlet tube.
N.B. Your installer will supply a wall outlet and may have to supply a
suitable alternative flexible duct to suit the wall outlet.
This appliance must not share the same air outlet as another appliance,
i.e. gas heating outlet.
Door installation: The door should be no less than 16mm thick, 385-700mm
high, and weigh no more than 7KG. Pull out the movable fan-shaped door
frames by the plastic handle, and place the fan-shaped door frames one on
left and one on right.
Mark the installation position of the door and the size of the fixed screws. If
the upper edge of the door is not as high as the upper edge of the
cupboards, please adjust the size accordingly. Mark the positions of the
screws on the door, and make sure the size is as accurate as 569±1.
