montpellier M603DDAP, Инструкция по установке и эксплуатации

Страница: 9 / 17

8
Section 3. Operating the Appliance
3.1. Switching on the Appliance

Allow the appliance to stand upright for a minimum of 4 hours before you switch it
on.

Plug in the appliance and switch on at the mains supply.
 Set the thermostat control panel to the required setting as detailed in the
Temperature Control section (3.2.).
 Leave the appliance for approximately 4 hours for the correct temperature to be
reached.
3.2. Temperature Control
The temperature control panel (LED) is located on the outer face of the freezer door.

The LED has two display modes, Standard and Energy Saving

When initially connected to the power supply the display will automatically go into
Energy Saving mode and the display will go off after approximately 30 seconds
 To select Standard mode, press the Supper Freeze button for approximately 5
seconds. The LED display will now remain on.
Display Panel
Lock/Unlock Button Super Freeze Button
Freezer Temperature Fridge Temperature
Fridge Compartment
Temperature Set Button Freezer Compartment
Temperature Set Button