
16
English
USE OF THE DEVICE
Preparing for use
- Place the motor housing (3) on a flat surface, e.g. a kitchen counter, and make sure it is
standing stabile.
- Place the grater house (6) on the motor unit so that the spout (5) fits in the slot on the side
of the motor section.
- Push the pulp container (2) up under the edge of the grater housing so that it locks on the
foot of the motor housing tightly.
- Carefully place the grater (7) in the grater housing . Be careful not to touch the sharp parts at
the bottom of the grater.
- Make sure that the grater fits properly in the housing and the gear in the grater and the
housing are connected properly.
- Make sure that the grater does not sit loosely on the base and that it rotates evenly.
- Place the lid (10) on the appliance so that it covers both the pulp container and the grater.
Make sure that the lid fits tightly onto the grater housing.
- Lift the latch (4) to the vertical position and make sure that it locks the lid. The latch makes a
clicking sound when this is done correctly.
- Place the juice cup under the spout.
- The device is now ready for use.
Preparing fruit or vegetables
Important: use only well-ripened fruit to avoid blockages so that cleaning is needed less often.
Wash or peel the fruit and the vegetables that you want to process. Always remove the stones
from fruits with large ones. For example from cherries, peaches and apricots the stones must
always be removed. Fruits with seeds, such as apples and pears can be processed with their
peels and cores. From fruits with a thick peel, such as citrus fruits, pineapples, melons, kiwis
and beetroots, the peel must first be removed. With grapes you remove only the thick stalks.
With green vegetables (spinach) and spices you must firmly roll the leaves together before
feeding them into the feeder.
Making juice
- Put the vegetables and/or fruit into the feeder. Turn the speed control knob to setting 1 ( low
speed) or 2 (normal speed) to switch on the appliance. Speed 1 is especially suitable for soft
fruits and vegetables such as watermelons, grapes, tomatoes, cucumbers and raspberries.
Speed 2 is suitable for all kinds of other fruits and vegetables. Use the grounder to press the
ingredients down. Add the remaining fruit or vegetables while the motor is running.
- You can continue making juice until the pulp container is beginning to fill up. You must
empty the pulp container when it is visibly full.
- Do not operate the juicer for more than 3 minutes when juicing heavy loads and let it cool
down sufficiently afterwards.
- Fruit and vegetable juices contain valuable vitamins and minerals. When the juice comes into
contact with oxygen or light, the quality and quantity of vitamins and minerals quickly
decrease. Therefore it is recommended to drink the fruit or vegetable juice when fresh,
preferably just after it has been made.