32
Attaching the steam head:
1
Slide the bottom end of main body (C) onto
the steam head (E) until steam head spindle 9
clicks into place.
2 The Steam head (E) can be removed from the
main body (C) by pressing salient point on the
steam head (E) spindle.
Attaching a cleaning pad:
1
Because of barb design at the bottom of steam
head (C), just place a micro-fiber cleaning pad
(F) to the steam head, they can bond hard.
2 Place the front of your shoe onto the cleaning
pad removal tab and press down firmly.
Attaching Carpet Gilder:
1
Press the micro-fiber cleaning pad (L) with main body to
carpet gilder (F) by vertical pressure until it fell into place.
2 Place the front of your shoe onto the cleaning pad removal tab
and press down firmly, the carpet gilder will remove the steam head.
OPERATION
1 Filling the water tank
Method one
：
Open the water tank cup (5), fill 370 ml water
use measuring cup, And then to close water tank
cup (5).
Method two
：
Remove the water tank from the main body, open
the water tank cup (5), fill the water tank from
the water faucet and then close the water tank
cup(5). Install the water tank (5) to the main body © until it clicks into place.
2 Plug in the appliance to a grounded outlet.
3
When switch the appliance on, the indicator light will turn red, it indicates preheating. If the
light does not illuminate, please check the "troubleshooting" section for more details.
