30
Refilling the water tank
If the water tank needs to be refilled during use, switch off the steamer and remove the plug from
the socket. Before opening the lid from the water tank to refill the tank, release the steam pressure
by pressing the steam trigger, or allow the cleaner to cool down completely. The water tank can be
refilled as follows: remove the lid by pressing it down and turning it anti-clockwise. Fill the tank with
260 ml of water using the measuring cup. Replace the lid and close it tightly by turning in the
clockwise direction.
Note:
Even after a cooling down period of 5 minutes, the water remaining in the tank and the lid will
still be hot. Always take care when removing the lid, since hot steam may be escape and the heat
of the lid can cause burns.
Do not add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in
this device, as this may damage the device and make it unsafe for use.
Do not exceed the maximum prescribed fill of 260 ml for the water tank.
The use of distilled water is recommended in areas with hard water to avoid lime scale deposits.
After use
1. Unplug the device from the wall socket.
2.
Allow the device to cool down completely.
3.
Empty the water tank by turning the device upside down.
MAINTENANCE AND CLEANING
Note:
Always unplug the device from the wall socket before cleaning.
Never immerse the device and/or the power cord in water or other liquids.
Cleaning the device
1.
Turn the device off and let it cool down completely
.
2.
Clean the device and accessories with a damp cloth and a mild detergent and allow to dry
completely
.
Note: never use abrasives, bleaching agents or steel wool to clean the device. This could cause
damage to the material.
Rinsing the water tank
To clean the water tank, we recommend that you fill it with water, close the lid and shake the unit
vigorously. This will release any lime-scale deposits that have collected on the bottom of the tank.
Pour the water out by holding the cleaner upside down.
Storage
1. Unplug the device from the wall socket.
2. Allow the device and the accessories to cool down completely.
3.
Empty the water tank by turning the device upside down.
