PVHFL58-300 Vertical Power Vent System
Installation
Installing the power vent
Back Cover / Collar
Outer Assembly
Inner Assembly
Louver Assembly
18 34 "
476
22 14 "
565
Framing
Wall Board
Outer Vent
Assembly
Step 1
1) Construct the support framing within the
measurements as shown here. The
dimensions shown here are minimum
dimensions to attach the Outer Assembly too.
Step 1
: Construct the support framing within the measurements as shown in
figure 2. The dimensions shown are minimum dimensions to attached the out
assembly.
Step 2
: Remove electrical plate from rear of inner can assembly. Bring electri-
cal wire from the inside to connect the power cord from the fireplace. Connect
molex connectors and return to the wire chase inside the inner can assembly.
Attached electrical plate to the rear of the inner can assembly. Attach the
venting from the fireplace to the rear of the inner can assembly.
Step 3
: Place the front grill into the outer can assembly by inserting the top
tabs into the upper frame and securing the bottom with 2 screws provided.
Figure 2.
.
Installing Flush Wall Mounted Power Vent
Structure
Outer Can Assembly
Inner Can Assembly
Power Cord from Power Vent
Power Cord
From Fireplace
Electrical Plate /
Strain Relief
Molex Connectors
Step 2:
1) Remove Electrical Plate from rear of Inner Can assembly. Bring electrical wire from the
inside as to connect to the Power Cord from the Fireplace. Connect Molex Connectors and
return to the wire chase inside the Inner Can Assembly. Attach Electrical Plate to the rear of the
Inner Can Assembly.
2) Slide Inner Can Assembly inside of the Outer Can Assembly and attach around the rear
panel with screws provided.
3) Attach the venting from the fireplace to the rear of the the Inner Can Assembly.
Figure 2a.
.
Installing Flush Wall Mounted Power Vent
Front Grill
Tabs
Screw
Locations
Step 3:
1) Place Front Grill into the Out Can
Assembly by inserting top tabs into the
upper frame and securing the bottom with
2 screws provided.
Figure 2b.
.
Installing Flush Wall Mounted Power Vent
Page 5
XG0519 - 031114
