Section 9: Installing the Accessories
Installing the Firestones
The
PL42DF*
is supplied with firestones. Remove the
Door as shown in the previous Instruction. Follow these
instructions to ensure all parts are removed or replaced
as required. Once the glass door is removed place the
firestones randomly across the pan and the burners as
described in
Figure 24 to 24d
.
Note: Only cover the burner with one layer of designer firestones.
Figure 24.
Installation of the firestones. (Ensure ONLY one
layer of firestones cover the surface).
Figure 24a.
Spreading the firestones evenly and make sure
there are no firestones covering the pilot.
To install the door, hook the top edge of the door frame into place.
Lower the door into position and follow the previous steps shown
in reverse order.
Installing the Door:
Step 8:
Grasp the Door on either side, usually midway and lift upward,
lift the door carefully up and away from the front of the fireplace.
See Figures 23f. Place the Door aside in a safe place while
maintenance and / or cleaning is being performed.
Figure 23f. Removing and installing the glass doors.
Removing the Door:
WARNING
When installing the fireplace - gas lines, fittings, accesso-
ries or any other objects cannot impede the proper
movement of the door buckles.
Figure 24b.
Completed firestone installation.
WARNING:
This appliance is intended for use only with
the included Montigo burners and accessories.
Never install or add any additional or alternative media,
rock wool or other material in this appliance.
The use of additional or alternative materials may pose
potential safety hazards, damage to the appliance, and
void manufacturer’s warranty.
Page 25
PL42DF* Indoor Gas Fireplace
XG0217 -160215.1
Installation
