P/N XG0202
Page 10
M38DV-PFC Peninsula Gas Fireplace
Installation
Removing and Installing the In-
ner Doors
Door Removal
The inner (combustion) doors are located behind the outer decorative
doors. To remove the inner doors, simply unscrew the nine (9) ma-
chine screws on the top, bottom and side of the door.
(See figure 17).
Door Installation
To attach the inner doors, align the door with the screw holes and
re-fasten with all nine machine screws. Ensure that a good seal is
maintained.
Operation
Lighting Instructions
See Pages 11-12.
Figure 17.
Removing inner doors.
9 x machine screws
Burner Adjustment
The M38DV-PFC is equipped with an adjustable burner, allowing you
to raise or lower the flames. To adjust the flames, locate the black
knob marked 'Hi-Lo', in the centre of the gas control valve (See Figure
26). The front burners are not adjustable.
To raise the flame height, turn the black knob (located behind the
lower trim)
counterclockwise
.
To lower the flame height, turn
clockwise
.
Figure 9.
'Hi-Lo' Adjustment on the M38DV-PFC gas valve.
Note:
M38DV-PFC models (electronic ignition) do not feature
hi/lo adjustment.
